Question # 19

Allied Advanced Lubrication.

How do I use the Marine MotorSilk 2 Cycle Gas Treatment?

The Marine MotorSilk 2 Cycle Gas Treatment product is used at a 1 to 1000 dilution ratio when mixing directly with the fuel. Add 1/8 oz. to 1 gallon of gas.

Or you can figure it this way: To treat 5 gallons of gasoline, add .64 oz. of the MotorSilk 2 Cycle Gas Treatment.

This is calculated as follows: 5 gallons of fuel = 640 oz. Divide the 640 oz. by 1000 to determine the correct amount of product to add (640 oz. / 1000 = .64 oz).

Note: Standard 2 cycle engine oil is still required when adding the MotorSilk 2 Cycle Gas Treatment product to the fuel.

For 2 cycle engines with automatic oil feed (reservoir) systems, add the MotorSilk 2 Cycle Gas Treatment product at a 1 to 10 dilution ratio.

For example, if the engine holds 1/2 gallon of oil, add 6.4 oz. of product to the oil reservoir. This is calculated as follows: 64 oz. (1/2 gallon) divided by 10 = 6.4 oz.