Question # 25

Allied Advanced Lubrication.

How do I treat my Class 8 truck engine with MotorSilk?

General Information (Class 8 Trucks)

MotorSilk Engine Treatment is added to the oil sump at a dilution ration of 1 part MotorSilk to 9 parts reservoir fluid.

For 40 to 44 quart (10 to 11 gallon) oil sump capacity engines, add 1 gallon of MotorSilk in place of 1 gallon of engine oil.

MotorSilk is added last, on top of the engine oil, to avoid having the product taken directly in the oil filter.

If the engine is equipped with an auxiliary (after-market) ultra-fine by-pass oil filtration system, disable the system before adding the MotorSilk Engine Treatment.

Do not re-enable the bypass filter until the engine treatment has been in the engine for at least 2000 miles.

Note: New and rebuilt engines may be treated with MotorSilk following the initial 10,000 mile break-in period.

Boron CLS Bond Technology Installation

Add MotorSilk engine treatment to new oil at the next scheduled oil service. Run engine for 1 hour to allow for the cleaning and removal of all deposits.

If engine oil pressure begins to drop significantly, this indicates the filters have become blocked from deposits. Change the filters immediately and continue to monitor engine oil pressure.

Note: See FAQ#11 for more information on how to use the MotorSilk Diesel Fuel Treatment.